Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Access Door
- 3 steps
Flags
0
BackIndia Mark III
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Access Door
- Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.
- Remove the hex head bolt from the top of the access door on the pump head.
- On reassembly, this bolt should be hand-tight.
Before performing any repairs, perform a water test on the pump by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.
Remove the hex head bolt from the top of the access door on the pump head.
On reassembly, this bolt should be hand-tight.
1024
Step 2
- Pull the access door straight up off the pump head.
- Store the access door in a sanitary place to prevent contamination.
Pull the access door straight up off the pump head.
Store the access door in a sanitary place to prevent contamination.
Step 3
- The access door has a tongue that fits into the base of the pump head.
- The access door makes a convenient tray to hold nuts and bolts during the disassembly.
The access door has a tongue that fits into the base of the pump head.
The access door makes a convenient tray to hold nuts and bolts during the disassembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Andrew Optimus Goldheart
Member since: 10/17/2009
491,689 Reputation
411 Guides authored
Badges:
44
+41 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,767 Guides authored
