Imac Intel 27 Emc 2390 Access Door Replacement Repair Guide

Difficulty

Easy

Steps

1

Time Required

Suggest a time??

Sections

• Access Door
• 1 step

Flags

0

• BackiMac Intel 27" EMC 2390

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Access Door               

• Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
• These screws will remain captive in the access door.
• Remove the access door from your iMac.
• During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

These screws will remain captive in the access door.

Remove the access door from your iMac.

During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

1024

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      12 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Walter Galan                     

682,038 Reputation

                                      1,203 Guides authored                  



                       Badges:
                       54







                                                        +51 more badges                           

Kevin McCartney - Feb 21, 2016

Reply

Easy mode. Note that the bits is called PZ1 most screwdriver sets. Also known as Japanese Phillips, the bid comes to a + instead of to a point. A 2.0 flathead will also turn the screw