Imac Intel 27 Emc 2309 And 2374 Access Door Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          1 - 10 minutes

Sections

Access Door
1 step

Flags

BackiMac Intel 27" EMC 2309 & 2374
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Access Door

Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
These screws will remain captive in the access door.
Remove the access door from your iMac.
During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

These screws will remain captive in the access door.

Remove the access door from your iMac.

During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

1024

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      30 other people completed this guide.

Author

                                      with 4 other contributors

                    Andrew Bookholt

575,478 Reputation

                                      618 Guides authored                  



                       Badges:
                       47







                                                        +44 more badges

Introduction#

What you need#

#

#

#

Introduction

What you need