Imac Intel 24 Emc 2267 Glass Panel Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Glass Panel
2 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackiMac Intel 24" EMC 2267
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Note - most of this guide was taken from the info for: iMac Intel 20" EMC 2266

The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.
Stick two suction cups to opposing corners of the glass panel. Small suction cups used to stick things to windows or shower walls work.
To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.
If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent.

The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.

Stick two suction cups to opposing corners of the glass panel. Small suction cups used to stick things to windows or shower walls work.

To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent.

1024

Step 2

Gently pull the glass panel straight up off the iMac.
The glass panel has several positioning pins around its perimeter. To avoid bending or shearing these pins off the glass panel, be sure to only pull straight up during removal.
Be meticulous about cleaning the LCD and the inside face of the glass panel before reinstallation, as any fingerprints or dust trapped inside will be annoyingly visible when the display is on.

Gently pull the glass panel straight up off the iMac.

The glass panel has several positioning pins around its perimeter. To avoid bending or shearing these pins off the glass panel, be sure to only pull straight up during removal.

Be meticulous about cleaning the LCD and the inside face of the glass panel before reinstallation, as any fingerprints or dust trapped inside will be annoyingly visible when the display is on.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      15 other people completed this guide.

Author

                                      with 2 other contributors

                    johann beda

Member since: 09/13/2010

2,440 Reputation

                                      4 Guides authored                  



                       Badges:
                       22







                                                        +19 more badges

geoff - Jun 12, 2012

Correct again - thanks to ifixit contributors. Great team

Member-Contributed Guide#

Introduction#

What you need#

#

#

#

#

Member-Contributed Guide

Introduction

What you need