Difficulty
Easy
Steps
1
Time Required
Suggest a time??
Sections
- Access Door
- 1 step
Flags
0
BackiMac Intel 21.5" EMC 2428
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Access Door
- Unplug your iMac’s AC cord along with any peripheral devices.
- Lay your iMac face-down on a soft, clean surface as shown.
- Be sure there isn’t any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.
- Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
- All three screws will remain captive in the access door.
- Remove the access door.
Unplug your iMac’s AC cord along with any peripheral devices.
Lay your iMac face-down on a soft, clean surface as shown.
Be sure there isn’t any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.
Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
All three screws will remain captive in the access door.
Remove the access door.
1024
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
Author
with 5 other contributors
Walter Galan
682,038 Reputation
1,203 Guides authored
Badges:
54
+51 more badges
