Imac Intel 21 5 Emc 2308 Glass Panel Replacement Repair Guide

Difficulty

Moderate

Steps

2

Time Required

                          5 - 10 minutes            

Sections

1

• Glass Panel
• 2 steps

Flags

0

• BackiMac Intel 21.5" EMC 2308

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Glass Panel               

• Before beginning, unplug your iMac and lay it on a soft surface as shown.
• Stick a suction cup near each of the two top corners of the glass panel.
• To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.
• If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent.

Before beginning, unplug your iMac and lay it on a soft surface as shown.

Stick a suction cup near each of the two top corners of the glass panel.

To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent.

1024

Step 2

• Gently lift the glass panel perpendicular to the face of the LCD enough to clear the steel mounting pins attached along the underside of the top edge of the glass panel.
• Pull the glass panel away from the lower edge of the iMac and carefully set it aside.
• During reinstallation, be sure to meticulously clean the inside of the glass panel and the face of the LCD as any dust or fingerprints trapped inside will be annoyingly visible when the machine is turned on.

Gently lift the glass panel perpendicular to the face of the LCD enough to clear the steel mounting pins attached along the underside of the top edge of the glass panel.

Pull the glass panel away from the lower edge of the iMac and carefully set it aside.

During reinstallation, be sure to meticulously clean the inside of the glass panel and the face of the LCD as any dust or fingerprints trapped inside will be annoyingly visible when the machine is turned on.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      28 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    Andrew Bookholt                     

575,478 Reputation

                                      618 Guides authored                  



                       Badges:
                       47







                                                        +44 more badges                           

yosef davidov - Jun 30, 2020

Reply

how much dose it cost

to fix 21 inch screen

?