Imac G5 17 Model A1058 Rear Panel Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

Suggest a time??

Sections

Rear Panel
2 steps

Flags

BackiMac G5 17" Model A1058
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Rear Panel

Lay the iMac display-side down on a flat surface.
Loosen the three Phillips screws securing the rear panel to the iMac.
These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

Lay the iMac display-side down on a flat surface.

Loosen the three Phillips screws securing the rear panel to the iMac.

These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

1024

Step 2

Lift the rear panel slightly from the bottom edge of the iMac.
Pull the rear panel toward yourself and remove it from the iMac.

Lift the rear panel slightly from the bottom edge of the iMac.

Pull the rear panel toward yourself and remove it from the iMac.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      15 other people completed this guide.

Author

                                      with 3 other contributors

                    Walter Galan

682,038 Reputation

                                      1,203 Guides authored                  



                       Badges:
                       54







                                                        +51 more badges

Introduction#

What you need#

#

#

#

#

Introduction

What you need