Imac G4 17 800 Mhz Emc 1936 Ram Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          10 - 20 minutes            

Sections

2

• Bottom Plate
• 3 steps
• RAM
• 1 step

Flags

0

• BackiMac G4 17 800 MHz EMC 1936

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Changing the RAM will not alter the data that is stored on your hard drive, but be sure to turn off your computer and unplug it prior to beginning your repair.

What you need

Step 1

              Bottom Plate               

• Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.

Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.

1024

Step 2

• Loosen the four Phillips #0 screws.

Loosen the four Phillips #0 screws.

Step 3

• Carefully remove the base access panel.

Carefully remove the base access panel.

Step 4

              RAM               

• Remove the RAM from the slot.

Remove the RAM from the slot.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      14 other people completed this guide.                                             

Author

                                      with 8 other contributors 

                    David Hunter                     

Member since: 10/05/2011

650 Reputation

                                      4 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges                           

Team

                       Cal Poly, Team 21-22, Maness Fall 2011                        

                                                  Member of Cal Poly, Team 21-22, Maness Fall 2011 



                    CPSU-MANESS-F11S21G22                     


                                            4 Members                     


                                            13 Guides authored                     

David Hunter - Nov 17, 2011

Reply

We need to show the RAM being taken off