Difficulty

Moderate

Steps

7

Time Required

                          25 minutes

Sections

2

  • Top Cover
  • 3 steps
  • Motherboard
  • 4 steps

Flags

0

  • BackiLive IKBC384S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Cover
  • Make sure you remove all seven 3 mm screws before proceeding to the next step.

Make sure you remove all seven 3 mm screws before proceeding to the next step.

1024

Step 2

  • Use iOpener or heat gun on all sides except the front.

Use iOpener or heat gun on all sides except the front.

Step 3

  • Be cautious when taking the top of the device off there may still be some adhesive stuck to device.
  • The top of the device will be very difficult to remove because of the adhesive holding it together.

Be cautious when taking the top of the device off there may still be some adhesive stuck to device.

The top of the device will be very difficult to remove because of the adhesive holding it together.

Step 4

              Motherboard
  • After removing the top of the device, locate the screws on the motherboard. Gently unscrew all four of the 3.5mm screws on the motherboard.

After removing the top of the device, locate the screws on the motherboard. Gently unscrew all four of the 3.5mm screws on the motherboard.

Step 5

  • Unplug the ribbon cable connected to the motherboard that stems from the disc drive.
  • Disconnect the two power connectors from the motherboard.

Unplug the ribbon cable connected to the motherboard that stems from the disc drive.

Disconnect the two power connectors from the motherboard.

Step 6

  • You will need to desolder the antenna.
  • Be sure to desolder the piece connected to the motherboard not the wire.

You will need to desolder the antenna.

Be sure to desolder the piece connected to the motherboard not the wire.

Step 7

  • You will need to remove the speakers and power connector.
  • Once you have removed all of these from the motherboard, the motherboard can be removed

You will need to remove the speakers and power connector.

Once you have removed all of these from the motherboard, the motherboard can be removed

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Tracy Walts

Member since: 03/21/2017

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Texas Tech, Team S46-G6, Bennett Spring 2017                        

                                                  Member of Texas Tech, Team S46-G6, Bennett Spring 2017 



                    TTU-BENNETT-S17S46G6                     


                                            3 Members                     


                                            6 Guides authored