Difficulty

Moderate

Steps

5

Time Required

                          35 minutes

Sections

2

  • Top Cover
  • 3 steps
  • Audio Speakers
  • 2 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackiLive IKBC384S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Cover
  • Make sure you remove all seven 3 mm screws before proceeding to the next step.

Make sure you remove all seven 3 mm screws before proceeding to the next step.

1024

Step 2

  • Use iOpener or heat gun on all sides except the front.

Use iOpener or heat gun on all sides except the front.

Step 3

  • Be cautious when taking the top of the device off there may still be some adhesive stuck to device.
  • The top of the device will be very difficult to remove because of the adhesive holding it together.

Be cautious when taking the top of the device off there may still be some adhesive stuck to device.

The top of the device will be very difficult to remove because of the adhesive holding it together.

Step 4

              Audio Speakers
  • Be sure to unscrew (3 mm) the two plastic brackets on each speaker, use iOpener or heat gun they are glued onto speakers, please do not discard.

Be sure to unscrew (3 mm) the two plastic brackets on each speaker, use iOpener or heat gun they are glued onto speakers, please do not discard.

Step 5

  • Unplug both of the speakers from the motherboard.

Unplug both of the speakers from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Allen Dover

Member since: 03/21/2017

401 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Texas Tech, Team S46-G6, Bennett Spring 2017                        

                                                  Member of Texas Tech, Team S46-G6, Bennett Spring 2017 



                    TTU-BENNETT-S17S46G6                     


                                            3 Members                     


                                            6 Guides authored