Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackiHome iPL8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the device over to access the bottom panel.
- Locate the 6mm Phillips #2 screw under the label “unscrew to open door.”
Turn the device over to access the bottom panel.
Locate the 6mm Phillips #2 screw under the label “unscrew to open door.”
1024
Step 2
- Using a Phillips #2 screwdriver, unscrew the captive screw.
- Keep turning until the screw and the door are loose.
Using a Phillips #2 screwdriver, unscrew the captive screw.
Keep turning until the screw and the door are loose.
Step 3
- Lift and remove the battery access panel.
- The captive screw will remain attached to the panel.
Lift and remove the battery access panel.
The captive screw will remain attached to the panel.
Step 4
- Gently press on the rim of the 3V battery.
- Remove the 3V battery.
Gently press on the rim of the 3V battery.
Remove the 3V battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Chen Zhong
Member since: 02/05/2019
569 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
UC Davis, Team S18-G5, Lore Winter 2019
Member of UC Davis, Team S18-G5, Lore Winter 2019
UCD-LORE-W19S18G5
3 Members
4 Guides authored