Difficulty
Easy
Steps
5
Time Required
3 minutes
Sections
2
- Dock Cover
- 3 steps
- Buttons
- 2 steps
Flags
0
BackiHome iP1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Dock Cover
- Orient the iHome upside down with the speakers facing you.
Orient the iHome upside down with the speakers facing you.
1024
Step 2
- Remove the two 9.5 mm Phillips #1 screws from the dock cover.
Remove the two 9.5 mm Phillips #1 screws from the dock cover.
Step 3
- Remove the dock cover by grabbing its sides and pulling it up and away from the faceplate.
Remove the dock cover by grabbing its sides and pulling it up and away from the faceplate.
Step 4
Buttons
- Disconnect the silver ribbon cable on the left-hand side by pulling away from the command buttons.
Disconnect the silver ribbon cable on the left-hand side by pulling away from the command buttons.
Step 5
- Remove the command buttons by pulling the small black panel containing them downward and away from the faceplate.
Remove the command buttons by pulling the small black panel containing them downward and away from the faceplate.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Wen Sullivan
Member since: 10/06/2016
518 Reputation
4 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 20-1, Livingston Fall 2016
Member of Cal Poly, Team 20-1, Livingston Fall 2016
CPSU-LIVINGSTON-F16S20G1
4 Members
7 Guides authored
David Ivar - Jan 12, 2020
Reply
Where can I buy the button PCB
