Ihome Ih27B Ipod Adapter Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

1

• iPod Adapter
• 5 steps

Flags

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

• BackiHome iH27B

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              iPod Adapter               

• Set the device with the adapter facing up.
• Remove the following screws:
• Two 10 mm Phillips #0

Set the device with the adapter facing up.

Remove the following screws:

Two 10 mm Phillips #0

1024

Step 2

• Grip the plastic adapter case and pull upwards with a medium amount of force. You will have to twist forward a little so that the connections are visible.
• The adapter will still be connected with wires, so make sure not to pull too hard.

Grip the plastic adapter case and pull upwards with a medium amount of force. You will have to twist forward a little so that the connections are visible.

The adapter will still be connected with wires, so make sure not to pull too hard.

Step 3

• Remove the following screws:
• Four 7 mm Phillips #0
• Lift out the two black plastic pieces that have come loose on either side of the circuit board, and set them aside.

Four 7 mm Phillips #0

Lift out the two black plastic pieces that have come loose on either side of the circuit board, and set them aside.

Step 4

• Carefully pry apart the bundle of white wires connected at the junction with the plastic opening tool.
• Do this slowly. Be careful not to damage the wires
• Lift out the circuit board that has become loose.

Carefully pry apart the bundle of white wires connected at the junction with the plastic opening tool.

Do this slowly. Be careful not to damage the wires

Lift out the circuit board that has become loose.

Step 5

• Pull out the adapter, and replace it with the new one.

Pull out the adapter, and replace it with the new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 

                    John Kraemer                     

Member since: 10/09/2012

64 Reputation

                                      9 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team 3-21, Amido Fall 2012                        

                                                  Member of Cal Poly, Team 3-21, Amido Fall 2012 



                    CPSU-AMIDO-F12S3G21                     


                                            4 Members                     


                                            9 Guides authored