Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes

Sections

1

  • Screen
  • 5 steps

Flags

0

  • BackiHome iBT230

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Remove the four 5.5 mm Phillips Head #00 screws from the bottom of the iBT230.

Remove the four 5.5 mm Phillips Head #00 screws from the bottom of the iBT230.

1024

Step 2

  • Grip the top of the iBT230 by placing your thumb on the back of the iBT230, where the USB port is located. Pull up, and you should notice different colored wires connected to the Main Motherboard.

Grip the top of the iBT230 by placing your thumb on the back of the iBT230, where the USB port is located. Pull up, and you should notice different colored wires connected to the Main Motherboard.

Step 3

  • Unplug the connectors from all sides of the iBT230, and unplug the wire that is connected to the screen.

Unplug the connectors from all sides of the iBT230, and unplug the wire that is connected to the screen.

Step 4

  • Unscrew the four 5.5 mm Phillips #00 face panel screws from the front screen.

Unscrew the four 5.5 mm Phillips #00 face panel screws from the front screen.

Step 5

  • Once the four 5.5 mm Phillips #00 face panel screws come out, slide the screen out vertically. Set the screen aside.
  • Disconnect the blue tipped ribbon, from the back of the screen.

Once the four 5.5 mm Phillips #00 face panel screws come out, slide the screen out vertically. Set the screen aside.

Disconnect the blue tipped ribbon, from the back of the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Bilal Siddiqui

Member since: 04/10/2017

376 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UW Tacoma, Team S3-G6, Liner Spring 2017                        

                                                  Member of UW Tacoma, Team S3-G6, Liner Spring 2017 



                    UWT-LINER-S17S3G6                     


                                            4 Members                     


                                            3 Guides authored