Ihome Ibt230 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

• Motherboard
• 4 steps

Flags

0

• BackiHome iBT230

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Remove the four 5.5 mm Phillips Head #00 screws from the bottom palate of the iBT230.

Remove the four 5.5 mm Phillips Head #00 screws from the bottom palate of the iBT230.

1024

Step 2

• Grip the top of the iBT230 by placing your thumb on the back portion, where the USB port is located. Pull up, and you should notice various different colored wires, connected to the Main Motherboard.

Grip the top of the iBT230 by placing your thumb on the back portion, where the USB port is located. Pull up, and you should notice various different colored wires, connected to the Main Motherboard.

Step 3

• Unplug the connectors from all sides of the iBT230, and unplug the wire connected to the screen.
• Make sure to note which wire goes where, you don’t want to re-solder the wires into the incorrect ports!

Unplug the connectors from all sides of the iBT230, and unplug the wire connected to the screen.

Make sure to note which wire goes where, you don’t want to re-solder the wires into the incorrect ports!

Step 4

• On the bottom component where the green Main Motherboard is located, remove the two 5.5 mm Phillips #00 screws.
• The old Motherboard will come free from the bottom of the iBT230.

On the bottom component where the green Main Motherboard is located, remove the two 5.5 mm Phillips #00 screws.

The old Motherboard will come free from the bottom of the iBT230.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Bilal Siddiqui                     

Member since: 04/10/2017

376 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UW Tacoma, Team S3-G6, Liner Spring 2017                        

                                                  Member of UW Tacoma, Team S3-G6, Liner Spring 2017 



                    UWT-LINER-S17S3G6                     


                                            4 Members                     


                                            3 Guides authored