Ifixit Adhesive Remover Preparation Repair Guide

Difficulty

Easy

Steps

Time Required

                          2 - 5 minutes

Sections

iFixit Adhesive Remover Preparation
2 steps

Flags

BackEliminador de Adhesivo de iFixit
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              iFixit Adhesive Remover Preparation

iFixit adhesive remover contains acetone, a mild skin and eye irritant.
Wear eye protection when handling and applying the adhesive remover. (Eye protection is included in your kit.)
Do not wear contact lenses without eye protection.
Protective gloves are also included in your kit. If you are concerned about possible skin irritation, put your gloves on now.

iFixit adhesive remover contains acetone, a mild skin and eye irritant.

Wear eye protection when handling and applying the adhesive remover. (Eye protection is included in your kit.)

Do not wear contact lenses without eye protection.

Protective gloves are also included in your kit. If you are concerned about possible skin irritation, put your gloves on now.

1024

Step 2

Pull off the black rubber stopper from your bottle of adhesive remover.
Twist to loosen or remove the bottle cap before you cut the applicator tip.
This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.
Use scissors to cut off the sealed tip of the applicator.
Cutting close to the narrow tip will give you better control so you can apply the adhesive remover in small amounts.
Twist and close the bottle cap securely before you proceed further.

Pull off the black rubber stopper from your bottle of adhesive remover.

Twist to loosen or remove the bottle cap before you cut the applicator tip.

This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.

Use scissors to cut off the sealed tip of the applicator.

Cutting close to the narrow tip will give you better control so you can apply the adhesive remover in small amounts.

Twist and close the bottle cap securely before you proceed further.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 1 other contributor

                    Arthur Shi

Member since: 01/03/2018

211,865 Reputation

                                      442 Guides authored                  



                       Badges:
                       46







                                                        +43 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored

Introduction#

What you need#

#

#

#

#

Team#

#

Introduction

What you need

Team