Idea Usa Ct 1020 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          25 minutes            

Sections

1

• Screen
• 6 steps

Flags

2

Missed a Step

Oops! This guide is currently missing some important steps.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackiDea USA CT 1020

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Screen               

• Start by powering off the device.
• Place the device on a clean surface with the screen facing down.

Start by powering off the device.

Place the device on a clean surface with the screen facing down.

1024

Step 2

• Gently apply pressure to the back of the device where the backing case and screen meet.

Gently apply pressure to the back of the device where the backing case and screen meet.

Step 3

• Using a spudger or an iFixit opening tool, lift and release the camera assembly ZIF tabs.
• Gently pull the ribbon cable free.
• Repeat this for the other tab.

Using a spudger or an iFixit opening tool, lift and release the camera assembly ZIF tabs.

Gently pull the ribbon cable free.

Repeat this for the other tab.

Step 4

• Remove the disconnected camera by simply pulling it out of its socket.
• Remove eight 25mm JIS #00 screws securing the motherboard.
• The battery is glued to the back of the screen. Gently pry the battery off the screen, being careful not the bend the battery.

Remove the disconnected camera by simply pulling it out of its socket.

Remove eight 25mm JIS #00 screws securing the motherboard.

The battery is glued to the back of the screen. Gently pry the battery off the screen, being careful not the bend the battery.

Step 5

• Remove ten 25mm JIS #00 screws securing the screen.

Remove ten 25mm JIS #00 screws securing the screen.

Step 6

• Wedge the edges of the opening tools into the gap between the screen and the screen casing.
• Be very careful while prying the screen from its casing to avoid damage.

Wedge the edges of the opening tools into the gap between the screen and the screen casing.

Be very careful while prying the screen from its casing to avoid damage.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Nathanael Carlson                     

Member since: 01/08/2018

183 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       IUPUI, Team S1-G3, Freund Spring 2018                        

                                                  Member of IUPUI, Team S1-G3, Freund Spring 2018 



                    IUPUI-FREUND-S18S1G3                     


                                            3 Members                     


                                            4 Guides authored                     

Nathanael Carlson - Feb 12, 2018

Reply

SOOOOO GOOD , Well done