Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Front & Rear Camera Assembly
- 4 steps
Flags
0
BackiDea USA CT 1020
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front & Rear Camera Assembly
- First, power down the tablet to avoid the chance of electrical shock or damaging the machine during repair work
- Place the tablet on a clean surface with the screen down
First, power down the tablet to avoid the chance of electrical shock or damaging the machine during repair work
Place the tablet on a clean surface with the screen down
1024
Step 2
- Remove the back plastic casing of the tablet by releasing the plastic clips with a plastic opening tool or a spudger.
- Be cautious and take your time here; the plastic clips are quite fragile.
Remove the back plastic casing of the tablet by releasing the plastic clips with a plastic opening tool or a spudger.
Be cautious and take your time here; the plastic clips are quite fragile.
Step 3
- Use a plastic opening tool or spudger to lift and release the camera assembly ZIF tab.
- Gently pull the ribbon cable free.
Use a plastic opening tool or spudger to lift and release the camera assembly ZIF tab.
Gently pull the ribbon cable free.
Step 4
- The camera is held in place by adhesive material on the back of the camera
- To complete removal, peel the camera off the mother board
The camera is held in place by adhesive material on the back of the camera
To complete removal, peel the camera off the mother board
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
David Lawrence
Member since: 01/22/2018
109 Reputation
1 Guide authored
Badges:
3
Team
IUPUI, Team S1-G3, Freund Spring 2018
Member of IUPUI, Team S1-G3, Freund Spring 2018
IUPUI-FREUND-S18S1G3
3 Members
4 Guides authored