Difficulty

Easy

Steps

4

Time Required

                          5 minutes

Sections

1

  • LCD Bezel
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackiBook G3 Clamshell

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery Cover
  • Use a coin to unscrew the battery cover, and remove battery.

Use a coin to unscrew the battery cover, and remove battery.

1024

Step 2

              Back Cover
  • Use a t8 Torx driver to unscrew the two screws holding in the back cover, then remove the cover.

Use a t8 Torx driver to unscrew the two screws holding in the back cover, then remove the cover.

Step 3

  • Open the screen, and remove the two t8 Torx screws holding the bezel in place.

Open the screen, and remove the two t8 Torx screws holding the bezel in place.

Step 4

  • Use a flat tip screw driver to unsnap the bezel from its place.
  • When at the top rubberized area, pry the bezel down.

Use a flat tip screw driver to unsnap the bezel from its place.

When at the top rubberized area, pry the bezel down.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    aidan

Member since: 02/26/2016

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge