Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

2

  • Keyboard
  • 3 steps
  • Display
  • 5 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackIBM ThinkPad A31

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Keyboard
  • The sticker is to keep the warranty on the laptop so once removed the warranty is void
  • Peel the sticker and remove the 15mm screw
  • Remove all 6 of the 16mm screws

The sticker is to keep the warranty on the laptop so once removed the warranty is void

Peel the sticker and remove the 15mm screw

Remove all 6 of the 16mm screws

1024

Step 2

  • use a prying tool and insert it on the cracks on the sides of the keyboard and lift gently until you here a click
  • repeat this step on all sides of the keyboard until the keyboard is completely detached from the laptop

use a prying tool and insert it on the cracks on the sides of the keyboard and lift gently until you here a click

repeat this step on all sides of the keyboard until the keyboard is completely detached from the laptop

Step 3

  • Lift the keyboard and remove the keyboard ribbon cable from the laptop

Lift the keyboard and remove the keyboard ribbon cable from the laptop

Step 4

              Display
  • Remove the one 21mm screw
  • Remove the 6mm screw

Remove the one 21mm screw

Remove the 6mm screw

Step 5

  • Take the tool and run it under the black case.

Take the tool and run it under the black case.

Step 6

  • Unscrew the 2 (17mm) screws
  • Unscrew the 6mm screw

Unscrew the 2 (17mm) screws

Unscrew the 6mm screw

Step 7

  • Gently disconnect the white display ribbon cable
  • Pulling on the ribbon cable too hard could result in worse or faulty connection.

Gently disconnect the white display ribbon cable

Pulling on the ribbon cable too hard could result in worse or faulty connection.

Step 8

  • Unscrew 4 (6mm) screws
  • Lift screen straight up
  • If not lifted straight up the screen could get damaged

Unscrew 4 (6mm) screws

Lift screen straight up

If not lifted straight up the screen could get damaged

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Sean Tocci

Member since: 03/19/2018

293 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team S2-G2, Bernier Spring 2018                        

                                                  Member of UMass Dartmouth, Team S2-G2, Bernier Spring 2018 



                    UMASSD-BERNIER-S18S2G2                     


                                            3 Members                     


                                            10 Guides authored

Ahmed Elwy - Apr 15, 2022

Reply

i have that but display is

not work