Difficulty

Moderate

Steps

14

Time Required

                          15 minutes            

Sections

5

  • Hard Drive
  • 1 step
  • Keyboard
  • 3 steps
  • Display
  • 5 steps
  • Battery
  • 1 step
  • CPU
  • 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackIBM ThinkPad A31

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Hard Drive               
  • Remove the 6mm screw
  • Pull out the hard drive
  • The hard drive might be a little tough to pull out

Remove the 6mm screw

Pull out the hard drive

The hard drive might be a little tough to pull out

1024

Step 2

              Keyboard               
  • The sticker is to keep the warranty on the laptop so once removed the warranty is void
  • Peel the sticker and remove the 15mm screw
  • Remove all 6 of the 16mm screws

The sticker is to keep the warranty on the laptop so once removed the warranty is void

Peel the sticker and remove the 15mm screw

Remove all 6 of the 16mm screws

Step 3

  • use a prying tool and insert it on the cracks on the sides of the keyboard and lift gently until you here a click
  • repeat this step on all sides of the keyboard until the keyboard is completely detached from the laptop

use a prying tool and insert it on the cracks on the sides of the keyboard and lift gently until you here a click

repeat this step on all sides of the keyboard until the keyboard is completely detached from the laptop

Step 4

  • Lift the keyboard and remove the keyboard ribbon cable from the laptop

Lift the keyboard and remove the keyboard ribbon cable from the laptop

Step 5

              Display               
  • Remove the one 21mm screw
  • Remove the 6mm screw

Remove the one 21mm screw

Step 6

  • Take the tool and run it under the black case.

Take the tool and run it under the black case.

Step 7

  • Unscrew the 2 (17mm) screws
  • Unscrew the 6mm screw

Unscrew the 2 (17mm) screws

Unscrew the 6mm screw

Step 8

  • Gently disconnect the white display ribbon cable
  • Pulling on the ribbon cable too hard could result in worse or faulty connection.

Gently disconnect the white display ribbon cable

Pulling on the ribbon cable too hard could result in worse or faulty connection.

Step 9

  • Unscrew 4 (6mm) screws
  • Lift screen straight up
  • If not lifted straight up the screen could get damaged

Unscrew 4 (6mm) screws

Lift screen straight up

If not lifted straight up the screen could get damaged

Step 10

              Battery               
  • Flip the ThinkPad over so that it is upside down.
  • Push latch switch to the left.
  • Gently lift the battery out and away from the ThinkPad
  • You have to hold the latch to the left while you remove the battery. Simply pushing once will not unlock the battery

Flip the ThinkPad over so that it is upside down.

Push latch switch to the left.

Gently lift the battery out and away from the ThinkPad

You have to hold the latch to the left while you remove the battery. Simply pushing once will not unlock the battery

Step 11

              CPU               
  • Remove the 6mm screw
  • LIft the bracket out

LIft the bracket out

Step 12

  • Remove one 6mm screw
  • Remove 3 18mm screws
  • Take off the bracket on the CPU fan

Remove one 6mm screw

Remove 3 18mm screws

Take off the bracket on the CPU fan

Step 13

  • Lift the CPU fan
  • Pull out the cable attached to the motherboard

Lift the CPU fan

Pull out the cable attached to the motherboard

Step 14

  • Turn the locking screw to unlock with the flat head screwdriver
  • LIft the CPU out

Turn the locking screw to unlock with the flat head screwdriver

LIft the CPU out

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Thomas Stone                     

Member since: 03/19/2018

235 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team S2-G2, Bernier Spring 2018                        

                                                  Member of UMass Dartmouth, Team S2-G2, Bernier Spring 2018 



                    UMASSD-BERNIER-S18S2G2                     


                                            3 Members                     


                                            10 Guides authored