Difficulty

Moderate

Steps

10

Time Required

                          5 - 15 minutes            

Sections

3

  • Battery
  • 2 steps
  • Antenna
  • 1 step
  • Keypad
  • 7 steps

Flags

0

  • BackHytera TC-580

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Remove the two 10mm Phillips #0 from the belt clip.

Remove the two 10mm Phillips #0 from the belt clip.

1024

Step 2

  • Push in the release button and pull up on the battery to remove.

Push in the release button and pull up on the battery to remove.

Step 3

              Antenna               
  • Twist antenna counter-clockwise and set damaged antenna aside.

Twist antenna counter-clockwise and set damaged antenna aside.

Step 4

              Keypad               
  • Remove the volume knob by firmly lifting up on both sides of it.

Remove the volume knob by firmly lifting up on both sides of it.

Step 5

  • Remove the orange o-ring around volume knob using tweezers.

Remove the orange o-ring around volume knob using tweezers.

Step 6

  • Remove grey nut from base of volume knob by turning it counterclockwise with a set of tweezers.

Remove grey nut from base of volume knob by turning it counterclockwise with a set of tweezers.

Step 7

  • Remove the brass washer from the base of the antenna slot by turning it counterclockwise with a set of tweezers.

Remove the brass washer from the base of the antenna slot by turning it counterclockwise with a set of tweezers.

Step 8

  • Remove the two 15mm T8 Torx screws from the base of the battery cavity.

Remove the two 15mm T8 Torx screws from the base of the battery cavity.

Step 9

  • Using a plastic opening tool, pry in between the plastic case and metal circuit board to remove the board.

Using a plastic opening tool, pry in between the plastic case and metal circuit board to remove the board.

Step 10

  • Peel off the keypad by hand.

Peel off the keypad by hand.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Stuart                     

Member since: 02/14/2018

443 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team S3-G4, Nance Spring 2018                        

                                                  Member of USF Tampa, Team S3-G4, Nance Spring 2018 



                    USFT-NANCE-S18S3G4                     


                                            3 Members                     


                                            5 Guides authored