Hyperx Alloy Origins Toggle Indicator Tab Replacement Repair Guide

Difficulty

Easy

Steps

2

Time Required

                          25 seconds - 5 minutes            

Sections

1

• Toggle Indicator Tab
• 2 steps

Flags

0

• BackHyperX Alloy Origins

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The toggle indicator tab of the HyperX Alloy Origins mechanical keyboard is required to be removed in order to access almost every other component of the keyboard (barring the keycaps). While simple to remove and replace, the toggle indicator tab is a very fragile part of the keyboard, and care should be taken in handling it. Be sure to visit the troubleshooting page first before determining that a part needs to be replaced!

Make sure the keyboard is disconnected from your device and that the LED’s are not on. Avoid using excessive force during disassembly to prevent damaging any of the keyboard’s components. Work on a solid, hard surface, and ground yourself occasionally during disassembly to mitigate electrostatic discharge from your hands, which could damage internal keyboard components.

What you need

Step 1

              Toggle Indicator Tab               

• Locate the toggle indicator tab on the top right corner of the keyboard.

Locate the toggle indicator tab on the top right corner of the keyboard.

1024

Step 2

• Insert the metal spudger or some other separating instrument into the right crevasse between the tab and the keyboard.
• Lift up gently on the tab, while holding the left side of the tab down.
• The tab can spring upwards upon removal. Eye protection is recommended during this step.

Insert the metal spudger or some other separating instrument into the right crevasse between the tab and the keyboard.

Lift up gently on the tab, while holding the left side of the tab down.

The tab can spring upwards upon removal. Eye protection is recommended during this step.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Adam Sles                     

Member since: 10/25/2022

178 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team 5-2, Sinclaire Fall 2022                        

                                                  Member of UMass Dartmouth, Team 5-2, Sinclaire Fall 2022 



                    UMASSD-SINCLAIRE-F22S5G2                     


                                            5 Members                     


                                            6 Guides authored