Difficulty

Moderate

Steps

3

Time Required

                          10 minutes

Sections

1

  • HyperX Alloy Origins HX-KB7RDX-US Disassembly
  • 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHyperX Alloy Origins

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              HyperX Alloy Origins Dissassembly
  • Turn the keyboard over so you can see the warranty sticker.
  • Remove the rubber foot from the upper right keyboard stand to expose the machine screw. Then remove the screw.

Turn the keyboard over so you can see the warranty sticker.

Remove the rubber foot from the upper right keyboard stand to expose the machine screw. Then remove the screw.

1024

Step 2

  • Remove all of the keys to expose the 16 black self tapping screws then remove the screws.
  • Be sure to save the screws in one place. They are easy to lose.

Remove all of the keys to expose the 16 black self tapping screws then remove the screws.

Be sure to save the screws in one place. They are easy to lose.

Step 3

  • Gently pry the casing away from they top to expose the PCB.

Gently pry the casing away from they top to expose the PCB.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Alexander Lang

Member since: 11/01/2020

97 Reputation

                                      1 Guide authored                  



                       Badges:
                       1