Husqvarna Viking Designer 1 Needle Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          15 - 20 minutes            

Sections

1

• Needle
• 8 steps

Flags

0

• BackSewing Machine

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Needle               

• Remove the thread from the needle by pulling it out.

Remove the thread from the needle by pulling it out.

1024

Step 2

• Turn the knob counterclockwise to life up the needle.
• Turning the knob clockwise can damage the machine.

Turn the knob counterclockwise to life up the needle.

Turning the knob clockwise can damage the machine.

Step 3

• Place a sheet of paper under the foot. In the event that the needle falls out, this will prevent it from falling into the bobbin area.

Place a sheet of paper under the foot. In the event that the needle falls out, this will prevent it from falling into the bobbin area.

Step 4

• Hold onto the needle with one hand, and use a Singer #412381501 screwdriver to loosen the needle clamp screw (model: Viking #4125825-01) located next to the top of the needle with the other hand.

Hold onto the needle with one hand, and use a Singer #412381501 screwdriver to loosen the needle clamp screw (model: Viking #4125825-01) located next to the top of the needle with the other hand.

Step 5

• Discard the broken or unwanted needle, and select a new one.

Discard the broken or unwanted needle, and select a new one.

Step 6

• Insert the new needle with the flat side facing away from you.

Insert the new needle with the flat side facing away from you.

Step 7

• Hold onto the needle with one hand, and use a Singer #412381501 screwdriver to tighten the needle clamp screw (model: Viking #4125825-01) with the other hand.

Hold onto the needle with one hand, and use a Singer #412381501 screwdriver to tighten the needle clamp screw (model: Viking #4125825-01) with the other hand.

Step 8

• Thread the needle. (See pages 8-10 from the link.)
• You may now remove the sheet of paper and begin sewing!

Thread the needle. (See pages 8-10 from the link.)

You may now remove the sheet of paper and begin sewing!

Replacing the needle is a quick, easy task to complete, using the directions provided in this guide.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Rebecca Jermolowicz                     

Member since: 03/18/2021

184 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Grand Valley State University, Team S3-G1, DeVasto Winter 2021                        

                                                  Member of Grand Valley State University, Team S3-G1, DeVasto Winter 2021 



                    GVSU-DEVASTO-W21S3G1                     


                                            1 Member                     


                                            1 Guide authored                     

KO SAMUEL TAK SHUN - Sep 17, 2022

Reply

Excellent illustration!!!