Huffy Kids Tricycle Seat Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Seat
6 steps

Flags

BackToy
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

SKN(Stock Keeping Number): 62960ID: 34634A3EUPC (Universal Product Code): 2891429161Brand: Huffy Bicycle CompanyManufacturing Number: 29161CItem Height: 9 inchesItem Length: 3 inchesItem Weight: 0.15 lbsItem Width: 3 inches

What you need

Step 1

              Seat

Focus on the seat area for the replacement.

Focus on the seat area for the replacement.

1024

Step 2

Place the spanner on the bolt on the underside of the seat.
Then use a Phillips #2 screwdriver to remove the screw on the top of the seat.

Place the spanner on the bolt on the underside of the seat.

Then use a Phillips #2 screwdriver to remove the screw on the top of the seat.

Step 3

Repeat for the other screw.

Repeat for the other screw.

Step 4

Lift the seat off of the trike frame.

Lift the seat off of the trike frame.

Step 5

Place the new seat on the seat bracket, lining up the screw holes in the seat with the appropriate holes on the bracket.
Note that the bracket has two sets of holes for mounting the seat, so choose the appropriate set for the height of the rider. A taller rider will use the further set while a shorter rider will use the set closer to the handlebars.
Insert the screws from the top of the seat, using your spanner to hold the nuts under the screws.

Place the new seat on the seat bracket, lining up the screw holes in the seat with the appropriate holes on the bracket.

Note that the bracket has two sets of holes for mounting the seat, so choose the appropriate set for the height of the rider. A taller rider will use the further set while a shorter rider will use the set closer to the handlebars.

Insert the screws from the top of the seat, using your spanner to hold the nuts under the screws.

Step 6

Give the seat a wiggle to check that it is tight against the bracket.
If there is any play, tighten the screws a few more turns.

Give the seat a wiggle to check that it is tight against the bracket.

If there is any play, tighten the screws a few more turns.

To reassemble your device, follow these instructions in reverse order and you should be able to accomplish this

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Babatunde Adewunmi

Member since: 09/18/2021

222 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       York University, Team F-4, Woodhouse Fall 2021                        

                                                  Member of York University, Team F-4, Woodhouse Fall 2021 



                    YORK-WOODHOUSE-F21SFG4                     


                                            1 Member                     


                                            1 Guide authored

Introduction#

What you need#

Team#

Introduction

What you need

Team