Huawei Watch Jewel Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

12

Time Required

                          10 - 15 minutes            

Sections

2

• Strap
• 5 steps
• Motherboard
• 7 steps

Flags

0

• BackHuawei Watch Jewel

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Strap               

• Begin by laying the watch on a flat, smooth surface.
• This will prevent the watch screen from suffering damage.
• Obtain a Flex Extension with a Size 1.0 mm flat-head. In the case of not having said tool, for this model of watch one can use the hands to replace the strap.

Begin by laying the watch on a flat, smooth surface.

This will prevent the watch screen from suffering damage.

Obtain a Flex Extension with a Size 1.0 mm flat-head. In the case of not having said tool, for this model of watch one can use the hands to replace the strap.

1024

Step 2

• Locate the two springs on the back of your watch.
• The watch comes with two of these springs on each side of the back-face. These are used to release the straps from the body of the watch.

Locate the two springs on the back of your watch.

The watch comes with two of these springs on each side of the back-face. These are used to release the straps from the body of the watch.

Step 3

• Use the Flex Extension to push the spring to the right. This will release the strap from the watch head.

Use the Flex Extension to push the spring to the right. This will release the strap from the watch head.

Step 4

• Carefully pull the strap away from the watch.

Carefully pull the strap away from the watch.

Step 5

• Repeat step 3, this time using the other strap.

Repeat step 3, this time using the other strap.

Step 6

              Motherboard               

• Locate the 4 T3 screws in the back of your watch, and use the T3 Torx Screwdriver to unscrew them.

Locate the 4 T3 screws in the back of your watch, and use the T3 Torx Screwdriver to unscrew them.

Step 7

• Use the Metal Spudger to pry open the back of your watch.
• Make sure the watch is off and not plugged in when prying into the case with the Metal Spudger to avoid the risk of electric shock.

Use the Metal Spudger to pry open the back of your watch.

Make sure the watch is off and not plugged in when prying into the case with the Metal Spudger to avoid the risk of electric shock.

Step 8

• Remove the back case.

Remove the back case.

Step 9

• Use tweezers or a nylon spudger to pry up the four press-fit connectors.
• The glued-down connector in the middle is harder to remove than the rest. That is perfectly fine.

Use tweezers or a nylon spudger to pry up the four press-fit connectors.

The glued-down connector in the middle is harder to remove than the rest. That is perfectly fine.

Step 10

• Locate the two Phillips #00 screws holding down the motherboard, and use the Phillips #00 screwdriver to remove them.
• Ensure to place these screws separately from the Torx screws, as they can easily be mixed up.

Locate the two Phillips #00 screws holding down the motherboard, and use the Phillips #00 screwdriver to remove them.

Ensure to place these screws separately from the Torx screws, as they can easily be mixed up.

Step 11

• Use the Metal Spudger to lift the mother board from the watch.
• The metal spudger may cause damage to the device, use a black nylon spudger when possible.

Use the Metal Spudger to lift the mother board from the watch.

The metal spudger may cause damage to the device, use a black nylon spudger when possible.

Step 12

• Remove the motherboard.

Remove the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    ngan tran                     

Member since: 02/15/2017

498 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team 5-3, Passmore Spring 2017                        

                                                  Member of USF Tampa, Team 5-3, Passmore Spring 2017 



                    USFT-PASSMORE-S17S5G3                     


                                            4 Members                     


                                            3 Guides authored                     

Mao Sereivathanak - Oct 26, 2018

Reply

where i can i buy Huawei Watch Jewel Motherboard online?