Huawei Watch 2 Opening Procedure Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 15 minutes

Sections

Huawei Watch 2 Opening Procedure
5 steps

Flags

BackHuawei Watch 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Huawei Watch 2 Opening Procedure

Before starting repairs, take your watch off the charger and power it down.
Feel free to attach or remove the watch band as needed to provide more control as you make repairs.

Before starting repairs, take your watch off the charger and power it down.

Feel free to attach or remove the watch band as needed to provide more control as you make repairs.

1024

Step 2

Remove the four Torx T2 screws (4.5 mm length).

Remove the four Torx T2 screws (4.5 mm length).

Step 3

Use a pair of tweezers to remove the four plastic covers sitting next to the watch band holders.

Use a pair of tweezers to remove the four plastic covers sitting next to the watch band holders.

Step 4

Insert an opening tool into the gap between the back cover and the watch case at the bottom edge of the back cover.
Use the opening tool to pry up the back cover of the Huawei Watch 2.
Do not remove the back cover assembly all the way yet—it’s still connected to the mainboard.

Insert an opening tool into the gap between the back cover and the watch case at the bottom edge of the back cover.

Use the opening tool to pry up the back cover of the Huawei Watch 2.

Do not remove the back cover assembly all the way yet—it’s still connected to the mainboard.

Step 5

Carefully fold the back cover assembly to the opposite side of the two watch crowns.

Carefully fold the back cover assembly to the opposite side of the two watch crowns.

To reassemble your Huawei Watch 2, follow these instructions in reverse order.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                    Dominik Schnabelrauch

Member since: 11/23/2016

158,135 Reputation

                                      649 Guides authored                  



                       Badges:
                       40







                                                        +37 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored

Cesar Carrillo - Oct 5, 2020

Tengo un problema con el reloj que no me esta haciendo las mediciones de la frecuencia cardiaca, como se cambia y donde se consigue ese sensor.

Gracias

Andy Andy - Dec 9, 2020

Hi, any ideas if you can get the rubber membrane that goes behind the buttons? One of mine has worn away so had to swap them so the main button actually worked. Just bottom button now not working..

Introduction#

What you need#

Team#

Introduction

What you need

Team