Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Rear Case
- 4 steps
Flags
0
BackHuawei P9 Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- First switch off your phone.
- Remove the SD and SIM card tray.
First switch off your phone.
Remove the SD and SIM card tray.
1024
Step 2
- Remove the two P2 Pentalobe screws on either side of the USB C port.
Remove the two P2 Pentalobe screws on either side of the USB C port.
Step 3
- Use an iSclack or a suction handle to separate the display unit from the rear case.
- Do not fully separate the pieces as they are still connected by the fingerprint sensor cable.
Use an iSclack or a suction handle to separate the display unit from the rear case.
Do not fully separate the pieces as they are still connected by the fingerprint sensor cable.
Step 4
- After separating the rear case flip the other half open to get to the flex connectors.
- With a spudger unplug the flex connector of the fingerprint sensor and the one of the side buttons.
- Remove the rear case.
After separating the rear case flip the other half open to get to the flex connectors.
With a spudger unplug the flex connector of the fingerprint sensor and the one of the side buttons.
Remove the rear case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Dominik Schnabelrauch
Member since: 11/23/2016
158,135 Reputation
649 Guides authored
Badges:
40
+37 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,769 Guides authored
