Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Remove Back Cover and Loudspeaker
- 3 steps
Flags
0
BackHuawei P8 Lite (2015)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove Back Cover and Loudspeaker
- Use the Spudger tool to get access to the loudspeaker. Locate where the headphone jack is, then move about one-inch to the right and begin to gently pry the back-cover off the phone with the flat end of the Spudger tool. Make sure to pry apart the entire perimeter of the back-cover to prevent bending/cracking of the plastic.
- Tools used: Spudger tool (used as a wedge to pry off the back-cover and loudspeaker.)
Use the Spudger tool to get access to the loudspeaker. Locate where the headphone jack is, then move about one-inch to the right and begin to gently pry the back-cover off the phone with the flat end of the Spudger tool. Make sure to pry apart the entire perimeter of the back-cover to prevent bending/cracking of the plastic.
Tools used: Spudger tool (used as a wedge to pry off the back-cover and loudspeaker.)
1024
Step 2
- Remove three silver Phillips 000 screws.
- Remove three T5 Torx screws.
Remove three silver Phillips 000 screws.
Remove three T5 Torx screws.
Step 3
- Gently, use the flat end of the Spudger tool, or a metal opening tool to lift and remove the loudspeaker from the phone. The loudspeaker is the entire portion of the phone where the screws were extracted.
Gently, use the flat end of the Spudger tool, or a metal opening tool to lift and remove the loudspeaker from the phone. The loudspeaker is the entire portion of the phone where the screws were extracted.
To reassemble your device, follow Teardown Guide steps 4, 3, 2, 1 in that order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 12 other contributors
Brayden Mann
Member since: 02/05/2016
639 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Metro State, Team 1-2, Carpenter Spring 2016
Member of Metro State, Team 1-2, Carpenter Spring 2016
MSU-CARPENTER-S16S1G2
3 Members
7 Guides authored