Difficulty

Moderate

Steps

8

Time Required

                          20 minutes            

Sections

1

  • Camera
  • 8 steps

Flags

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

  • BackHuawei P8 Lite (2015)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Camera               
  • Using the Spudger, begin by removing both of the SIM slots from the side of the device.

Using the Spudger, begin by removing both of the SIM slots from the side of the device.

1024

Step 2

  • Then remove the back cover of the device with the Spudger. To prevent damage to the back cover, begin removing the cover half an inch to the right of the headphone jack and continue prying around the perimeter of the device.

Then remove the back cover of the device with the Spudger. To prevent damage to the back cover, begin removing the cover half an inch to the right of the headphone jack and continue prying around the perimeter of the device.

Step 3

  • Locate the Loudspeaker at the bottom of the device.
  • Remove the four black screws using the T5 Torx Screwdriver.
  • Then use the Phillips #000 Screwdriver to remove the three silver screws.

Locate the Loudspeaker at the bottom of the device.

Remove the four black screws using the T5 Torx Screwdriver.

Then use the Phillips #000 Screwdriver to remove the three silver screws.

Step 4

  • Use the Spudger to gently remove the Loudspeaker from the device. Place the replacement Loudspeaker into the device and follow these steps in reverse order to reassemble the device.

Use the Spudger to gently remove the Loudspeaker from the device. Place the replacement Loudspeaker into the device and follow these steps in reverse order to reassemble the device.

Step 5

  • Gently separate the connectors attached to the motherboard.

Gently separate the connectors attached to the motherboard.

Step 6

  • Carefully remove the motherboard from the device.

Carefully remove the motherboard from the device.

Step 7

  • Once the motherboard is removed use the Spudger to remove the Front Camera.

Once the motherboard is removed use the Spudger to remove the Front Camera.

Step 8

  • Similarly, use the Spudger to remove the Rear Camera.

Similarly, use the Spudger to remove the Rear Camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    John Poffenberger                     

Member since: 02/16/2017

353 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Tampa, Team 1-1, Kass Spring 2017                        

                                                  Member of USF Tampa, Team 1-1, Kass Spring 2017 



                    USFT-KASS-S17S1G1                     


                                            5 Members                     


                                            5 Guides authored