Huawei P10 Plus Display Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 minutes - 1 hour

Sections

Display
4 steps

Flags

BackHuawei P10 Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

If the screen is broken you might want to protect your eyes from glass shreds and get a better grip to open the phone by applying some tape onto the screen.

If your replacement part does not come with adhesive mounted on it, you will also need to purchase new adhesive.

What you need

Step 1

              Display

Use an iOpener to loosen the adhesive beneath the display, focusing on the upper and lower part of the display.
Use an opening pick, or iFlex, to separate the adhesive on all sides of the display.
To avoid damage to the display, do not push the tool too deeply into the phone.

Use an iOpener to loosen the adhesive beneath the display, focusing on the upper and lower part of the display.

Use an opening pick, or iFlex, to separate the adhesive on all sides of the display.

To avoid damage to the display, do not push the tool too deeply into the phone.

1024

Step 2

There is a thin display cable between the screen and phone, be very careful not to rip it when opening the device.
Place a suction cup, or iSclack, on the upper portion of the phone and lift the display off the midframe.
Don’t remove the display, the cable is trapped under a bracket screwed to the phone. You can flip the display to lay it down without straining the cable, or simply hold it in the next steps.

There is a thin display cable between the screen and phone, be very careful not to rip it when opening the device.

Place a suction cup, or iSclack, on the upper portion of the phone and lift the display off the midframe.

Don’t remove the display, the cable is trapped under a bracket screwed to the phone. You can flip the display to lay it down without straining the cable, or simply hold it in the next steps.

Step 3

              Unfasten the screw

Remove the 3.3 mm-long Phillips screw securing the display flex connector bracket.

Remove the 3.3 mm-long Phillips screw securing the display flex connector bracket.

Step 4

Open the metal bracket that covers the display flex cable.
Use a spudger to disconnect the display flex cable.
Remove the display.
When reassembling your phone replace old adhesive with double-sided tape or pre-cut adhesive strips.

Open the metal bracket that covers the display flex cable.

Use a spudger to disconnect the display flex cable.

Remove the display.

When reassembling your phone replace old adhesive with double-sided tape or pre-cut adhesive strips.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 4 other contributors

                    Tobias Isakeit

Member since: 03/31/2014

105,397 Reputation

                                      184 Guides authored                  



                       Badges:
                       46







                                                        +43 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team