Huawei Mediapad M3 Front Camera Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          5 minutes            

Sections

2

• Display Assembly
• 5 steps
• Front Camera
• 4 steps

Flags

0

• BackHuawei MediaPad M3

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Display Assembly               

• Use a heat gun to heat the display. It may take up to 30 seconds.
• Slide in the opening picks to the four corners of the tablet and peel off the display carefully.

Use a heat gun to heat the display. It may take up to 30 seconds.

Slide in the opening picks to the four corners of the tablet and peel off the display carefully.

1024

Step 2

• Open the display carefully.
• Use a Phillips #00 screwdriver to remove the two 3.0mm screws.

Open the display carefully.

Use a Phillips #00 screwdriver to remove the two 3.0mm screws.

Step 3

• After removing the two screws, use your hand to take out the silver metal bracket.

After removing the two screws, use your hand to take out the silver metal bracket.

Step 4

• Use the plastic opening tool to disconnect the two ribbon cable connectors.

Use the plastic opening tool to disconnect the two ribbon cable connectors.

Step 5

• Remove the display assembly from the device.

Remove the display assembly from the device.

Step 6

              Front Camera               

• Use a Phillips #00 screwdriver to remove the six 3.0mm screws.

Use a Phillips #00 screwdriver to remove the six 3.0mm screws.

Step 7

• Use your hand to remove the silver metal bracket.

Use your hand to remove the silver metal bracket.

Step 8

• Use your hand to remove the two black plastic covers.

Use your hand to remove the two black plastic covers.

Step 9

• Use a plastic opening tool to remove the front camera.

Use a plastic opening tool to remove the front camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 

                    Kefan Lin                     

Member since: 10/01/2019

515 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Duke University Pratt School of Engineering, Team S5-G2, Matos-Garner Fall 2019                        

                                                  Member of Duke University Pratt School of Engineering, Team S5-G2, Matos-Garner Fall 2019 



                    DUKEPSE-MATOS-GARNER-F19S5G2                     


                                            5 Members                     


                                            4 Guides authored