Difficulty
Easy
Steps
5
Time Required
15 minutes
Sections
1
- Charging Port
- 5 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackHuawei MediaPad M3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Charging Port
- Using the TE-03 Metal Wedge Tool, remove the display by gently sliding it under the edge of the display.
Using the TE-03 Metal Wedge Tool, remove the display by gently sliding it under the edge of the display.
1024
Step 2
- Use a Phillips #00 screwdriver to remove three 3.0mm screws from the metal casing on the charging port.
Use a Phillips #00 screwdriver to remove three 3.0mm screws from the metal casing on the charging port.
Step 3
- Using the Phillips #00 screwdriver, remove the eight screws.
Using the Phillips #00 screwdriver, remove the eight screws.
Step 4
- Using the tweezers, remove the ribbon cable from the charging port.
Using the tweezers, remove the ribbon cable from the charging port.
Step 5
- Using the tweezers, remove the black piece attached to the green charging port.
Using the tweezers, remove the black piece attached to the green charging port.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Albert Hope
Member since: 02/20/2020
148 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
The Citadel Military College of South Carolina, Team S2-G12, Eggleston Spring 2020
Member of The Citadel Military College of South Carolina, Team S2-G12, Eggleston Spring 2020
CMCSC-EGGLESTON-S20S2G12
3 Members
5 Guides authored