Huawei Mate 10 Lite Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 30 minutes

Sections

battery
4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackHuawei Mate 10 lite
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

You have to take appropriate security measures if the battery is swollen. For your own security you should drain the battery to 25% as that reduces the risk of fire if you damage the battery during repair.

The backcover is not glued so it can be opened easily.

What you need

Step 1

              Remove SIM card

Remove the SIM card by using a paperclip or a special tool and inserting it into the hole next to the SIM card tray until it pops out.

Remove the SIM card by using a paperclip or a special tool and inserting it into the hole next to the SIM card tray until it pops out.

1024

Step 2

              Open the case

Remove the Torx T2 screws on the bottom of the case(next to the USB port)
Use the Opening tool on the bottom of the case and pry it open
go around the side to open the phone
place the device screen down and take the backcover off to the left side

Remove the Torx T2 screws on the bottom of the case(next to the USB port)

Use the Opening tool on the bottom of the case and pry it open

go around the side to open the phone

place the device screen down and take the backcover off to the left side

Step 3

              Remove the cables

Red: Phillips #00 screws
Blue: Remove the cable clamps with the Spudger
Remove the cables connecting to the backside and remove the cables that run over the battery

Red: Phillips #00 screws

Blue: Remove the cable clamps with the Spudger

Remove the cables connecting to the backside and remove the cables that run over the battery

Step 4

              Remove the battery

Insert the plastic card into the side and push them under the battery
the glue under the battery can be removed with highgrade IPA or a special glue remover. Otherwise you can pry the battery out with the spudger, the plastic cards and the opening picks

Insert the plastic card into the side and push them under the battery

the glue under the battery can be removed with highgrade IPA or a special glue remover. Otherwise you can pry the battery out with the spudger, the plastic cards and the opening picks

Follow the guide in the opposite direction and use the replacement battery.

Cancel: I did not complete this guide.

        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Maximilian Deisz

oldturkey03

Author

                                      with 1 other contributor

                    Maximilian Deisz

Member since: 10/04/2021

326 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Member-Contributed Guide#

Introduction#

What you need#

#

#

#

#

#

#

Member-Contributed Guide

Introduction

What you need