Difficulty

Moderate

Steps

7

Time Required

                          5 - 7 minutes

Sections

3

  • Battery
  • 2 steps
  • Back Panel
  • 3 steps
  • Charging Port
  • 2 steps

Flags

0

  • BackHuawei M750

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Depress the top of the battery cover, and pull downwards towards the base of the phone.

Depress the top of the battery cover, and pull downwards towards the base of the phone.

1024

Step 2

  • Remove the battery by levering the battery out, using the cut just below the camera.

Remove the battery by levering the battery out, using the cut just below the camera.

Step 3

              Back Panel
  • Use the opening tool to start prying the camera and speaker cover, starting from the battery side.
  • Work the opening tool around the border of the camera and speaker cover, until it comes loose.

Use the opening tool to start prying the camera and speaker cover, starting from the battery side.

Work the opening tool around the border of the camera and speaker cover, until it comes loose.

Step 4

  • Using the T5 Torx screwdriver, remove the six 6mm screws.

Using the T5 Torx screwdriver, remove the six 6mm screws.

Step 5

  • Using the opening tool, pry the back panel from the front panel.
  • Work your way around the phone until the panels separate evenly.
  • This step may require a substantial amount of leverage.

Using the opening tool, pry the back panel from the front panel.

Work your way around the phone until the panels separate evenly.

This step may require a substantial amount of leverage.

Step 6

              Charging Port
  • Using the opening tool, start prying out the motherboard from the front panel along the border.
  • When the motherboard seems separated from the front panel, pull it outwards.

Using the opening tool, start prying out the motherboard from the front panel along the border.

When the motherboard seems separated from the front panel, pull it outwards.

Step 7

  • The charging port is soldered to the motherboard, use this guide to do the replacement.

The charging port is soldered to the motherboard, use this guide to do the replacement.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Kshitiz Thapa

Member since: 02/11/2018

389 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       University of North Texas, Team S1-G6, Thompson Spring 2018                        

                                                  Member of University of North Texas, Team S1-G6, Thompson Spring 2018 



                    UNT-THOMPSON-S18S1G6                     


                                            3 Members                     


                                            15 Guides authored