Difficulty
Moderate
Steps
12
Time Required
20 - 40 minutes
Sections
3
- SIM Card
- 4 steps
- Back Cover
- 5 steps
- Battery
- 3 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackHuawei Honor 6x
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
SIM Card
- Turn off the device.
Turn off the device.
1024
Step 2
- Insert the SIM Card Eject Tool into the SIM card tray hole.
- Press the eject tool into the hole until the tray clicks open.
Insert the SIM Card Eject Tool into the SIM card tray hole.
Press the eject tool into the hole until the tray clicks open.
Step 3
- Remove the SIM tray from the device using two fingers.
- When reinserting the SIM card, be sure it is properly aligned with the SIM tray.
Remove the SIM tray from the device using two fingers.
When reinserting the SIM card, be sure it is properly aligned with the SIM tray.
Step 4
- Remove the SIM card from the compartment using two fingers.
Remove the SIM card from the compartment using two fingers.
Step 5
Back Cover
- Insert a plastic opening tool into the Micro USB charging port with the the angled side of the tool facing the screen.
- Pry the screen off the back of the phone by pushing down on the opening tool.
Insert a plastic opening tool into the Micro USB charging port with the the angled side of the tool facing the screen.
Pry the screen off the back of the phone by pushing down on the opening tool.
Step 6
- Slide the opening tool or spudger along the bottom of the phone and around the edge.
Slide the opening tool or spudger along the bottom of the phone and around the edge.
Step 7
- Once three sides of the screen are detached, pry the phone apart using two hands.
- When separating the back panel from the screen, do not pull them too far apart. There is an interconnect that is attached to both sides that could break, or tear, if pulled too far.
Once three sides of the screen are detached, pry the phone apart using two hands.
When separating the back panel from the screen, do not pull them too far apart. There is an interconnect that is attached to both sides that could break, or tear, if pulled too far.
Step 8
- Remove the five 4mm Phillips #00 screws using a screwdriver.
Remove the five 4mm Phillips #00 screws using a screwdriver.
Step 9
- Remove the motherboard cover from the device using a spudger or your fingers.
Remove the motherboard cover from the device using a spudger or your fingers.
Step 10
Battery
- Remove the four connectors by placing the spudger between the motherboard and the connectors.
- Press upwards against the connectors until they disconnect.
- The connectors will make a “click” sound when disconnected.
Remove the four connectors by placing the spudger between the motherboard and the connectors.
Press upwards against the connectors until they disconnect.
The connectors will make a “click” sound when disconnected.
Step 11
- Remove the battery by first prying a spudger between the battery and the screen.
- Slice through the adhesive by pushing card around and underneath the battery.
- The adhesive is fairly strong, so make sure to press firmly against the adhesive.
- Do not excessively bend the battery. Bending the battery too much can cause it to break and even catch fire.
Remove the battery by first prying a spudger between the battery and the screen.
Slice through the adhesive by pushing card around and underneath the battery.
The adhesive is fairly strong, so make sure to press firmly against the adhesive.
Do not excessively bend the battery. Bending the battery too much can cause it to break and even catch fire.
Step 12
- Using the plastic card, remove the battery by lifting it from the casing.
Using the plastic card, remove the battery by lifting it from the casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
14 other people completed this guide.
Author
with 4 other contributors
Hudson Brooks
Member since: 10/08/2018
465 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team S13-G5, White Fall 2018
Member of Cal Poly, Team S13-G5, White Fall 2018
CPSU-WHITE-F18S13G5
4 Members
14 Guides authored
satyanarayan debbarma - Aug 3, 2020
Reply
Where do i get its original battery, its mostly fake batteries out there in online stores
Varler - Jan 6, 2021
Reply
@satyanarayan+debbarma
