Difficulty

Moderate

Steps

9

Time Required

                          20 minutes

Sections

3

  • HUAWEI HONOR 5X Disassembly
  • 5 steps
  • Motherboard
  • 3 steps
  • Vibration Motor
  • 1 step

Flags

0

  • BackHuawei Honor 5X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              HUAWEI HONOR 5X Disassembly
  • Turn off your cell phone before disassembling.

Turn off your cell phone before disassembling.

1024

Step 2

  • Remove the two 1.17mm Torx T3 screws from the bottom of the phone.

Remove the two 1.17mm Torx T3 screws from the bottom of the phone.

Step 3

  • Use the Sim card ejection tool to remove both the sim card trays.

Use the Sim card ejection tool to remove both the sim card trays.

Step 4

  • To prepare the iOpener insert it in the microwave for 30 seconds and apply it on the side edges of the phone so that the glue underneath will soften.

To prepare the iOpener insert it in the microwave for 30 seconds and apply it on the side edges of the phone so that the glue underneath will soften.

Step 5

  • Pry off the back with a plastic opening tool.

Pry off the back with a plastic opening tool.

Step 6

              Motherboard
  • Remove the five 1.5mm Phillips #000 screws from the motherboard.

Remove the five 1.5mm Phillips #000 screws from the motherboard.

Step 7

  • Use a plastic opening tool to pry up and disconnect the display cable from the motherboard.
  • Use tweezers to disconnect the white coax cable.
  • Use tweezers to disconnect the power and volume cable.

Use a plastic opening tool to pry up and disconnect the display cable from the motherboard.

Use tweezers to disconnect the white coax cable.

Use tweezers to disconnect the power and volume cable.

Step 8

  • Remove the motherboard.

Remove the motherboard.

Step 9

              Vibration Motor
  • Using the metal spudger, pry the adhered vibration monitor to remove.
  • Using the metal spudger may damage the internal components of your device, so please use the plastic spudger or opening tool instead.

Using the metal spudger, pry the adhered vibration monitor to remove.

Using the metal spudger may damage the internal components of your device, so please use the plastic spudger or opening tool instead.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Coffel

Member since: 02/13/2020

73 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       The Citadel Military College of South Carolina, Team S2-G11, Eggleston Spring 2020                        

                                                  Member of The Citadel Military College of South Carolina, Team S2-G11, Eggleston Spring 2020 



                    CMCSC-EGGLESTON-S20S2G11                     


                                            3 Members                     


                                            5 Guides authored