Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

3

  • HUAWEI HONOR 5X Disassembly
  • 5 steps
  • Motherboard
  • 3 steps
  • Fingerprint Scanner
  • 2 steps

Flags

0

  • BackHuawei Honor 5X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              HUAWEI HONOR 5X Disassembly
  • Turn off your cell phone before disassembling.

Turn off your cell phone before disassembling.

1024

Step 2

  • Remove the two 1.17mm Torx T3 screws from the bottom of the phone.

Remove the two 1.17mm Torx T3 screws from the bottom of the phone.

Step 3

  • Use the Sim card ejection tool to remove both the sim card trays.

Use the Sim card ejection tool to remove both the sim card trays.

Step 4

  • To prepare the iOpener insert it in the microwave for 30 seconds and apply it on the side edges of the phone so that the glue underneath will soften.

To prepare the iOpener insert it in the microwave for 30 seconds and apply it on the side edges of the phone so that the glue underneath will soften.

Step 5

  • Pry off the back with a plastic opening tool.

Pry off the back with a plastic opening tool.

Step 6

              Motherboard
  • Remove the five 1.5mm Phillips #000 screws from the motherboard.

Remove the five 1.5mm Phillips #000 screws from the motherboard.

Step 7

  • Use a plastic opening tool to pry up and disconnect the display cable from the motherboard.
  • Use tweezers to disconnect the white coax cable.
  • Use tweezers to disconnect the power and volume cable.

Use a plastic opening tool to pry up and disconnect the display cable from the motherboard.

Use tweezers to disconnect the white coax cable.

Use tweezers to disconnect the power and volume cable.

Step 8

  • Remove the motherboard.

Remove the motherboard.

Step 9

              Fingerprint Scanner
  • Pull the fingerprint scanner out of its housing.

Pull the fingerprint scanner out of its housing.

Step 10

  • This is what the mother board should look like when the fingerprint scanner is pulled out.
  • To fix the fingerprint scanner simply add in a new one and attach the metal component to its coordinating place.

This is what the mother board should look like when the fingerprint scanner is pulled out.

To fix the fingerprint scanner simply add in a new one and attach the metal component to its coordinating place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Klara Asllani

Member since: 01/25/2018

788 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team S7-G6, Passmore Spring 2018                        

                                                  Member of USF Tampa, Team S7-G6, Passmore Spring 2018 



                    USFT-PASSMORE-S18S7G6                     


                                            3 Members                     


                                            12 Guides authored