Huawei Honor 20 Lite Battery Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          40 minutes - 1 hour            

Sections

1

• battery
• 7 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackHuawei Honor 20 lite

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              heating back cover               

• Place phone on a heating bed.
• I set it to 80 degrees celcius and left it on there for 5 minutes.

Place phone on a heating bed.

I set it to 80 degrees celcius and left it on there for 5 minutes.

1024

Step 2

              removing the back cover               

• once the glue is softened, use the plastic pick tool to loosen one edge.
• leave a pick under one side to stop that side from re-sticking as you move onto the next edge.

once the glue is softened, use the plastic pick tool to loosen one edge.

leave a pick under one side to stop that side from re-sticking as you move onto the next edge.

Step 3

              undoing the screws               

• place the back cover side by side with the rest of he phone. being careful a the fingerprint scanner cable is on the back of the phone
• take out all the screws in the bottom part of the phone and gently lift off, away from the phone.
• unclip the ribbon cable.

place the back cover side by side with the rest of he phone. being careful a the fingerprint scanner cable is on the back of the phone

take out all the screws in the bottom part of the phone and gently lift off, away from the phone.

unclip the ribbon cable.

Step 4

              top screws               

• next repeat the same process along the top part. (be careful with the cameras, the cover should just unclip without much effort.)
• be careful of the 2 screws circled. these need to come out as well.

next repeat the same process along the top part. (be careful with the cameras, the cover should just unclip without much effort.)

be careful of the 2 screws circled. these need to come out as well.

Step 5

              pulling battery tabs               

• gently pry the battery terminal away from the board
• next pull tab 1 and 2 individually.

gently pry the battery terminal away from the board

next pull tab 1 and 2 individually.

Step 6

              battery removal               

• when you pull tab 3, the battery should hinge away from you and then pull towards you .

when you pull tab 3, the battery should hinge away from you and then pull towards you .

Step 7

              insert new battery               

• insert a new battery and repeat the steps backwards.

insert a new battery and repeat the steps backwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    chris dodds                     

Member since: 11/15/2020

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       2