Huawei Ascend Xt Back Cover Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Back Cover
3 steps

Flags

BackHuawei Ascend XT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Use the 0.8 Sim driver bit to remove the SIM tray by inserting it into the hole on the side of the device.
Once the hole is pressed in firm, the SIM tray will pop out. This allows you to grab it and extract it from the device.

Use the 0.8 Sim driver bit to remove the SIM tray by inserting it into the hole on the side of the device.

Once the hole is pressed in firm, the SIM tray will pop out. This allows you to grab it and extract it from the device.

1024

Step 2

Make a thumbs-up and use it to grip the plastic opening tool with the flat end pointing in the direction of your thumb.
Place the flat end of the opening tool slightly inside the charging port and place your thumb on the back of the phone.
Press into the phone with your thumb while pulling the opening tool back with your fist to begin prying the back off.

Make a thumbs-up and use it to grip the plastic opening tool with the flat end pointing in the direction of your thumb.

Place the flat end of the opening tool slightly inside the charging port and place your thumb on the back of the phone.

Press into the phone with your thumb while pulling the opening tool back with your fist to begin prying the back off.

Step 3

Slide the flat end of the spudger along the edge of the device, prying off the back cover.
Carefully remove the back cover. This may be difficult due to glue on the inside.
Replace the back cover with a new one and reassemble the device.

Slide the flat end of the spudger along the edge of the device, prying off the back cover.

Carefully remove the back cover. This may be difficult due to glue on the inside.

Replace the back cover with a new one and reassemble the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Andrew Becker

Member since: 09/24/2018

204 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       The Citadel Military College of South Carolina, Team S3-G8, Eggleston Fall 2018                        

                                                  Member of The Citadel Military College of South Carolina, Team S3-G8, Eggleston Fall 2018 



                    CMCSC-EGGLESTON-F18S3G8                     


                                            5 Members                     


                                            10 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team