Huawei Ascend G700 Touchscreen Display Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          1 hour            

Sections

1

• Touchscreen Display
• 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackHuawei ascend G700

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Step 1

              Touchscreen Display               

• Remove the back cover and battery

Remove the back cover and battery

1024

Step 2

• Remove the indicated screws

Remove the indicated screws

Step 3

• unhook Central frame using a thin tool behind joints along the entire perimeter of the phone

unhook Central frame using a thin tool behind joints along the entire perimeter of the phone

Step 4

• Unplug the touchscreen connector.
• Unplug the motherboard connector.
• Unplug the side volume key connector.

Unplug the touchscreen connector.

Unplug the motherboard connector.

Unplug the side volume key connector.

Step 5

• Unplug the display connector.
• Unplug the camera connector.

Unplug the display connector.

Unplug the camera connector.

Step 6

• Unplug the motherboard.

Unplug the motherboard.

Step 7

• Remove the camera with a heat source because it’s glued to the bottom.
• Remove the motherboard from the main body of the phone.
• Remove the power button using a heat source.
• Remove the volume key using a heat source.

Remove the camera with a heat source because it’s glued to the bottom.

Remove the motherboard from the main body of the phone.

Remove the power button using a heat source.

Remove the volume key using a heat source.

Step 8

• Remove the speaker cover.
• Using a heat source, delicately remove the daughterboard.

Remove the speaker cover.

Using a heat source, delicately remove the daughterboard.

Step 9

• Remove the speaker using a heat source.
• Remove the technical adhesive strips using a heat source.

Remove the speaker using a heat source.

Remove the technical adhesive strips using a heat source.

To reassemble the device, follow this instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

Ben Johnson

Mat Teo

Author

                                      with 1 other contributor 

                    Smilzo                     

Member since: 11/09/2013

10,473 Reputation

                                      39 Guides authored                  



                       Badges:
                       23







                                                        +20 more badges