Huawei Ascend G610 Volume And Power Buttons Replacement Ignition Repair Guide

Difficulty

Moderate

Steps

12

Time Required

                          55 minutes            

Sections

1

• Volume and power buttons
• 12 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackHuawei Ascend G610

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Step 1

              Volume and power buttons               

• Remove the back cover.

Remove the back cover.

1024

Step 2

• Remove the battery.

Remove the battery.

Step 3

• with the help of a Phillips screwdriver remove the nine side screws, one is under the adhesive that must be removed
• Remove the 10th screw, it is shorter in the middle near the Sim card slot

with the help of a Phillips screwdriver remove the nine side screws, one is under the adhesive that must be removed

Remove the 10th screw, it is shorter in the middle near the Sim card slot

Step 4

• With the help of a thin tool, pry laterally on the joints and remove the central body

With the help of a thin tool, pry laterally on the joints and remove the central body

Step 5

• Disconnect the display connector.

Disconnect the display connector.

Step 6

• Disconnect the light sensor connector.

Disconnect the light sensor connector.

Step 7

• Disconnect the touch screen connector.

Disconnect the touch screen connector.

Step 8

• Pry out the connector between the two boards

Pry out the connector between the two boards

Step 9

• With a thin tool, help us to unhook the motherboard from the joints

With a thin tool, help us to unhook the motherboard from the joints

Step 10

• Remove the motherboard

Remove the motherboard

Step 11

• With the help of a heat source, remove the audio and power button ribbon cable

With the help of a heat source, remove the audio and power button ribbon cable

Step 12

• Replace with the new component

Replace with the new component

To reassemble your device follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

irlanda

albertob

Author

                                      with 1 other contributor 

                    Smilzo                     

Member since: 11/09/2013

10,473 Reputation

                                      39 Guides authored                  



                       Badges:
                       23







                                                        +20 more badges