Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

3

  • Battery
  • 1 step
  • Back Panel
  • 5 steps
  • Speakers
  • 1 step

Flags

0

  • BackHTC Wizard 200

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • To expose the battery, remove the outer case with your fingernail.
  • Remove the battery by pulling the black tab.

To expose the battery, remove the outer case with your fingernail.

Remove the battery by pulling the black tab.

1024

Step 2

              Back Panel
  • Insert the flat end of the spudger into the two notches on the back of the camera cover and pry them up.

Insert the flat end of the spudger into the two notches on the back of the camera cover and pry them up.

Step 3

  • Work the spudger around the edges of the camera cover until it comes off.

Work the spudger around the edges of the camera cover until it comes off.

Step 4

  • Remove the four 6 mm screws with the T5 Torx screwdriver.
  • One of the screws is under the “void” sticker.

Remove the four 6 mm screws with the T5 Torx screwdriver.

One of the screws is under the “void” sticker.

Step 5

  • Insert the flat end of an iFixit opening tool between the side and inner covers to create a gap.
  • Work the tool around the edges until all the clips release.

Insert the flat end of an iFixit opening tool between the side and inner covers to create a gap.

Work the tool around the edges until all the clips release.

Step 6

  • Once all the clips are open, remove the inner panel from the phone.

Once all the clips are open, remove the inner panel from the phone.

Step 7

              Speakers
  • Device rotated 180 degrees.
  • Use the plastic opening tool to disconnect the speaker connections.

Device rotated 180 degrees.

Use the plastic opening tool to disconnect the speaker connections.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Kyle Champ

Member since: 10/03/2011

225 Reputation

                                      12 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 20-27, Maness Fall 2011                        

                                                  Member of Cal Poly, Team 20-27, Maness Fall 2011 



                    CPSU-MANESS-F11S20G27                     


                                            4 Members                     


                                            24 Guides authored