Difficulty

Moderate

Steps

7

Time Required

                          15 - 20 minutes

Sections

3

  • Loudspeaker
  • 2 steps
  • Battery
  • 2 steps
  • Logic Board
  • 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHTC Windows Phone 8S

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Video Overview

Step 1

              Loudspeaker
  • Switch off the phone.
  • Remove the SIM / memory card cover.
  • Remove any SIM and memory cards.
  • Use screwdriver torx T5 and unscrew the two screws at the bottom of the battery / back cover.

Switch off the phone.

Remove the SIM / memory card cover.

Remove any SIM and memory cards.

Use screwdriver torx T5 and unscrew the two screws at the bottom of the battery / back cover.

1024

Step 2

  • Use a plastic tool and slowly separate the back cover.
  • The loudspeaker is inside on the back cover.

Use a plastic tool and slowly separate the back cover.

The loudspeaker is inside on the back cover.

Step 3

              Battery
  • Use a Phillips #0 screwdriver and remove the 4x silver screws.
  • With a plastic tool carefully separate the battery from the logic board.

Use a Phillips #0 screwdriver and remove the 4x silver screws.

With a plastic tool carefully separate the battery from the logic board.

Step 4

  • The battery connector is under the middle frame. Remove it and disconnect the battery.
  • Model: BM59100 / 3,8VDC / 1700mAh

The battery connector is under the middle frame. Remove it and disconnect the battery.

Model: BM59100 / 3,8VDC / 1700mAh

Step 5

              Flex Cables
  • Remove the USB dock connector metal plate.
  • Open flex cable connectors:
  • LCD display flex cable
  • Menu buttons flex cable
  • Volume buttons flex cable
  • Touch screen flex cable
  • Power button flex cable
  • Pick up the vibrating motor and take out all flex cables except the LCD display flex cable.

Remove the USB dock connector metal plate.

Open flex cable connectors:

LCD display flex cable

Menu buttons flex cable

Volume buttons flex cable

Touch screen flex cable

Power button flex cable

Pick up the vibrating motor and take out all flex cables except the LCD display flex cable.

Step 6

              Logic Board Removal
  • The logic board is secured to the display frame by two locking clips.
  • Use a plastic tool to release it.
  • Now remove the LCD display flex cable from its connector.

The logic board is secured to the display frame by two locking clips.

Use a plastic tool to release it.

Now remove the LCD display flex cable from its connector.

Step 7

              Logic Board / Main Board
  • HTC Windows Phone 8S Logic Board.

HTC Windows Phone 8S Logic Board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35





                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored