Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Rear Head Strap
- 3 steps
Flags
0
BackHTC Vive Focus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Unscrew the head strap mounts
- Use a T6 Torx screwdriver to remove the four 4.6 mm screws securing the rear head strap, two on each side.
Use a T6 Torx screwdriver to remove the four 4.6 mm screws securing the rear head strap, two on each side.
1024
Step 2
Disconnect the rear head strap
- Remove the plastic cover from the rear head strap mount.
- Lift the rear head strap off of the two pegs securing it to the mount.
- Repeat for the remaining side of the rear head strap.
- During reassembly, be careful not to install the rear head strap upside-down. The adjustment knob on the back of the head strap should be on top.
Remove the plastic cover from the rear head strap mount.
Lift the rear head strap off of the two pegs securing it to the mount.
Repeat for the remaining side of the rear head strap.
During reassembly, be careful not to install the rear head strap upside-down. The adjustment knob on the back of the head strap should be on top.
Step 3
Remove the rear head strap
- Remove the rear head strap.
Remove the rear head strap.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Sam Omiotek
Member since: 02/25/2019
55,294 Reputation
288 Guides authored
Badges:
35
+32 more badges
Team
Guide Team
Member of Guide Team
Community
10 Members
9,216 Guides authored