Difficulty
Moderate
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Facerest
- 3 steps
Flags
0
BackHTC Vive
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Unscrew the head strap mounts
- Be sure to power down and disconnect your Vive before beginning.
- Use a T5 Torx driver to remove the two 12 mm-long screws securing the head strap mounts on either side of the headset.
- The mounts may fall off when the screws are removed, so be careful not to lose any parts.
Be sure to power down and disconnect your Vive before beginning.
Use a T5 Torx driver to remove the two 12 mm-long screws securing the head strap mounts on either side of the headset.
The mounts may fall off when the screws are removed, so be careful not to lose any parts.
1024
Step 2
Remove the head strap mounts
- Remove both head strap mounts.
Remove both head strap mounts.
Step 3
Remove the facerest
- Slide the facerest straight away from the headset to remove it.
Slide the facerest straight away from the headset to remove it.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 7 other contributors
Adam O'Camb
Member since: 04/11/2015
173,479 Reputation
418 Guides authored
Badges:
39
+36 more badges
