Difficulty
Easy
Steps
8
Time Required
5 minutes
Sections
2
- Battery
- 2 steps
- USB Logic Board
- 6 steps
Flags
0
BackHTC Touch Pro CDMA
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- First, gently press on the back plate and push down toward the camera.
First, gently press on the back plate and push down toward the camera.
1024
Step 2
- Use your finger to lift up the edge of the battery.
Use your finger to lift up the edge of the battery.
Step 3
USB Logic Board
- Remove the 4 screws using the T6 screw driver.
Remove the 4 screws using the T6 screw driver.
Step 4
- Lift the plastic cover near the memory card slot.
Lift the plastic cover near the memory card slot.
Step 5
- Remove the two Phillips #00 screws from the backside of the screen.
Remove the two Phillips #00 screws from the backside of the screen.
Step 6
- Insert a spudger or a plastic opening tool into the seam on the side of the phone.
- Gently pry apart the two halves of the phone.
Insert a spudger or a plastic opening tool into the seam on the side of the phone.
Gently pry apart the two halves of the phone.
Step 7
- Gently unplug the connectors.
- Remove the screws with a 00 Phillips-head screwdriver.
Gently unplug the connectors.
Remove the screws with a 00 Phillips-head screwdriver.
Step 8
- Gently lift the motherboard up using a nylon spudger.
- BE AWARE OF THE ANTENNA.
Gently lift the motherboard up using a nylon spudger.
BE AWARE OF THE ANTENNA.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Zhaowei Zhang
Member since: 04/28/2011
133 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
CSU Los Angeles, Team 1-6, Nelson Spring 2011
Member of CSU Los Angeles, Team 1-6, Nelson Spring 2011
CSULA-NELSON-S11S1G6
3 Members
8 Guides authored
