Difficulty

Easy

Steps

9

Time Required

                          5 minutes

Sections

3

  • Battery
  • 2 steps
  • USB Logic Board
  • 6 steps
  • Keyboard
  • 1 step

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackHTC Touch Pro CDMA

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • First, gently press on the back plate and push down toward the camera.

First, gently press on the back plate and push down toward the camera.

1024

Step 2

  • Use your finger to lift up the edge of the battery.

Use your finger to lift up the edge of the battery.

Step 3

              USB Logic Board
  • Remove the 4 screws using the T6 screw driver.

Remove the 4 screws using the T6 screw driver.

Step 4

  • Lift the plastic cover near the memory card slot.

Lift the plastic cover near the memory card slot.

Step 5

  • Remove the two Phillips #00 screws from the backside of the screen.

Remove the two Phillips #00 screws from the backside of the screen.

Step 6

  • Insert a spudger or a plastic opening tool into the seam on the side of the phone.
  • Gently pry apart the two halves of the phone.

Insert a spudger or a plastic opening tool into the seam on the side of the phone.

Gently pry apart the two halves of the phone.

Step 7

  • Gently unplug the connectors.
  • Remove the screws with a 00 Phillips-head screwdriver.

Gently unplug the connectors.

Remove the screws with a 00 Phillips-head screwdriver.

Step 8

  • Gently lift the motherboard up using a nylon spudger.
  • BE AWARE OF THE ANTENNA.

Gently lift the motherboard up using a nylon spudger.

BE AWARE OF THE ANTENNA.

Step 9

              Keyboard
  • Remove the 4 screws circled in red using a 00 Phillips-head screwdriver.

Remove the 4 screws circled in red using a 00 Phillips-head screwdriver.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Zhaowei Zhang

Member since: 04/28/2011

133 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       CSU Los Angeles, Team 1-6, Nelson Spring 2011                        

                                                  Member of CSU Los Angeles, Team 1-6, Nelson Spring 2011 



                    CSULA-NELSON-S11S1G6                     


                                            3 Members                     


                                            8 Guides authored