Htc Touch Pro 2 Logic Board Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          15 - 30 minutes            

Sections

2

• Battery
• 2 steps
• Housing
• 2 steps

Flags

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Missed a Step

Oops! This guide is currently missing some important steps.

• BackHTC Touch Pro 2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Battery               

• Remove the back cover by applying pressure and sliding upward.
• Lift the back cover up and away from the phone.

Remove the back cover by applying pressure and sliding upward.

Lift the back cover up and away from the phone.

1024

Step 2

• Remove the battery by lifting upward from the slot located on the right hand side.

Remove the battery by lifting upward from the slot located on the right hand side.

Step 3

              Housing               

• Using a T5 screwdriver, remove the four screws in corners as shown.
• Lift the top portion of the rear case.
• There is a ribbon attached on the back of this part that requires caution to remove.

Using a T5 screwdriver, remove the four screws in corners as shown.

Lift the top portion of the rear case.

There is a ribbon attached on the back of this part that requires caution to remove.

Step 4

• Using a plastic opening tool, detach the plastic casing from keyboard. This may require some force.
• Using a spudger or other thin tool, carefully pry up ZIF connectors as shown. This will allow the black ribbons to detach from the keyboard.
• Slide the two parts away from each other so that the black ribbons slide through the slots and you will now have housing into two parts.

Using a plastic opening tool, detach the plastic casing from keyboard. This may require some force.

Using a spudger or other thin tool, carefully pry up ZIF connectors as shown. This will allow the black ribbons to detach from the keyboard.

Slide the two parts away from each other so that the black ribbons slide through the slots and you will now have housing into two parts.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 6 other contributors 

                    Melinda Phan                     

Member since: 04/17/2011

435 Reputation

                                      9 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Cal Poly, Team 9-64, Walters Spring 2011                        

                                                  Member of Cal Poly, Team 9-64, Walters Spring 2011 



                    CPSU-WALTERS-S11S9G64                     


                                            5 Members                     


                                            18 Guides authored